Patch Holes and Prep Walls the Right Way

Drywall installation and repair in Lancaster for remodels, water damage, and smooth finishes ready for paint.

Your home in Lancaster may have drywall that cracked along the seams, developed holes from removed fixtures, or sustained water damage after a roof leak or plumbing issue. Drywall installation and repair restores wall and ceiling surfaces so they look flat, smooth, and ready for texture or paint. If you are remodeling a kitchen or bathroom, adding electrical outlets, or replacing old paneling, new drywall creates a clean base that supports the rest of the finish work. First Choice General Contractor handles repairs that range from small patches to full room installs, and the crew matches existing textures when needed.

The process starts with removing damaged sections, cutting new drywall to fit, then fastening it to the studs with screws spaced according to code. Joints get taped with paper or mesh tape, then covered with multiple coats of joint compound that are sanded smooth between applications. Once the surface is flush and free of ridges, it is primed and ready for the painter. This service works alongside plumbing, electrical, and insulation upgrades, and it is a required step in most remodeling projects throughout Lancaster.

Schedule an inspection in Lancaster to review the damaged areas and receive a repair or installation quote.

Get a Quote

Get a Quote

All fields marked with an asterisk * are required

Lifetime Warranty

on glass and vinyl

How the surface goes from uneven to paintable

The crew in Lancaster cuts out any damaged drywall, checks the framing for mold or rot, then installs new sheets using a drill and drywall screws. Seams are taped, and the first coat of joint compound is applied over the tape and screw heads. After that coat dries, the surface is sanded, and a second coat is applied to fill any low spots. A third coat is added if necessary, and the final sanding leaves the wall smooth and level. You can request a knockdown or orange peel texture if the surrounding walls have that finish.

After the work is complete, the wall will feel solid when you press on it, and you will not see lines, bumps, or shadows when light hits the surface at an angle. The repaired section blends with the rest of the room, and paint or wallpaper adheres evenly across the entire surface.

This service includes cleanup of drywall dust and scrap material, but it does not include painting or texture application unless specified in the estimate. If the damage was caused by a roof leak or plumbing issue, those repairs must be completed before new drywall is installed. The crew will identify any underlying issues during the inspection and recommend the correct order of work.

Here is what people usually ask before booking

These questions address the details that affect timing, cost, and how the finished wall will look once the work is done.

What causes drywall to crack or bubble?
Drywall cracks when the house settles, when studs shift due to temperature changes, or when the original install used too few fasteners. Bubbling occurs when moisture gets trapped behind the surface, often from roof leaks or high humidity.
How long does drywall repair take to dry?
Each coat of joint compound takes 12 to 24 hours to dry, depending on humidity and ventilation. A typical repair with three coats takes three to four days from start to finish, including sanding.
What is the difference between repair and replacement?
Repair involves patching a small area, while replacement removes entire sheets of damaged drywall and installs new ones. Replacement is necessary when water damage is widespread or when mold is present behind the surface.
When should I replace drywall after water damage?
You should replace drywall if it feels soft, shows visible mold, or has absorbed water for more than 48 hours. First Choice General Contractor inspects the wall cavity and framing to confirm whether a patch or full replacement is needed.
Why is taping and mudding done in multiple coats?
Multiple coats allow the joint compound to build up gradually, which prevents cracking and creates a smooth transition between the patch and the existing wall. Sanding between coats removes ridges and prepares the surface for the next layer.

First Choice General Contractor inspects drywall damage in Lancaster, provides a written estimate for repair or installation, and schedules the work to fit your remodeling timeline. Get in touch to review your walls and confirm what needs to be done.